Mill Freedom and Expression Essay - 1450 Words

There they go again. The usual horde of five-inch heels, cleavage and navel displaying, and miniskirts that are just high enough to have a clear visual of the type of underwear each woman is wearing. It is the middle of winter and they are just acting like they are hot stuff. Is this acceptable? Should it be acceptable? Maybe a look at Mill’s beliefs can answer these questions. The introduction of the book is crucial to understanding Mill’s arguments and the status of his beliefs. It states the basic structure of his argument and his own key deductions. Mill steps back and defines his idea of civilization. He sees it as a struggle with individual people and what creates and defines our society. Which of†¦show more content†¦A perfect example would be if a small boy was swimming at the beach and got carried out too far and was unable to swim. You happen to have an inner tube and rush out to save him, even risking your own life. If you did not the chil d could drown which would most certainly cause harm. This implied rule will keep people from ignoring those in need or turning a blind eye. Mill believes that this will be great for society as a whole. Mill then goes into further depth and breaks up the three different categories of our liberty and the importance of having each and every one of them respected by others and the authority. The first is â€Å"the freedom to think as one wishes, and to feel as one does. This includes the freedom to opinion, and includes the freedom to publish opinions known as the freedom of speech.† Next is â€Å"the freedom to pursue tastes and pursuits, even if they are deemed ‘immoral’, and only so long as they do not cause harm.† Finally is â€Å"the ‘freedom to unite’ or meet with others, often known as the freedom of assembly due to its being phrased as such in the United States constitution.† Each of these definitions were Mill’s words n ot my own. If we do not have each and every one of these liberties than we truly are not free. Each of the phrases in quotes were taken from the book as Mill’s definitions are not my own. How I understand it,Show MoreRelatedJohn Stuart Mill on Liberty and Freedom of Expression1388 Words   |  6 PagesInhibition of ones liberty, such as their liberty of conscience (i.e. freedom of speech), is unjust by Millian principles, unless the persons use of deliberation is to voice hate speech. So what is hate speech? Hate speech is directed towards a member of a group, or the group as a whole, that vilifies on the basis of the subjects beliefs. In comparison to discriminatory speech, hate speech does not invoke mere offense, but in most cases is traumatic, and severely impair one’s deliberative capacitiesRead MoreAccording to Mills, government should not be attempting to control individual freedoms, but should1100 Words   |  5 Pages According to Mills, government should not be attempting to control individual freedoms, but should be helping individuals develop in society. A society is only as great as the people who are in it. How a person develops should be up to them, but a government should support that development. Ensuring a free flow of factual information and opportunities for open discussion are ways a government can help. Again, he uses history as his support. He says that the history of mankind is a history of intellectualRead MoreThe Fundamental Principles Of The Us Constitution1439 Words   |  6 PagesOne of the fundamental principles of the US Constitution is the freedom of speech. Something so ingrained in the country, that it is often an afterthought for many Americans. John Stuart Mill believes that freedom of expression and speech is a necessity for the human race to advance and evolve. Mill’s justification of this absolute freedom come from the understanding that mistakes and choices made by the person leads to progress a nd the development of your individual self. He also argues that speechRead MoreThe Perception Of Beauty Is Subjective And Dependent On The Viewer1645 Words   |  7 Pageswill most likely have an alternative perspective. Artwork is all about the expression of ideas, the meaning behind why the ideas are expressed a particular way, and the impact the piece has on the viewer’s emotions. The point of censorship is to monitor what information or ideas are being exerted in order to remove harmful or sensitive content from being viewed. However, by removing content, discussion and the expression of ideas are also being removed. This puts restrictions on what informationRead More2.1 The Birth Of Free Speech . It Is Difficult To Pinpoint1267 Words   |  6 Pages2.1 THE BIRTH OF FREE SPEECH It is difficult to pinpoint the exact time or year in which the concept of free speech emerged. It has been argued over and debated since the time of ancient Greeks, freedom of speech has always been an indispensable condition of what it means to be a free person. The first known martyr to the principle of free speech was Socrates. In 399BC before his jury to city state of Athens he was tried for corruption the morals of Greek youth and he said that he would ratherRead MoreFree Speech : Freedom Of Speech1403 Words   |  6 PagesFREE SPEECH Freedom of speech is perhaps the most precious tenets of liberal democracies accorded to the citizens of the free world. The United States, and the rest of the Western society is known to be the cradle of democratic principles, and this can be evidenced by the level of freedom accorded to the citizens of the United States and the West in terms of speech. The freedom of speech gives an individual an opportunity to speak his or her mind and also give his or her opinion, sometimes on veryRead MoreThe People vs. Larry Flynt1332 Words   |  6 PagesFreedom of expression has always been a heated and heavily debated topic throughout our society, more so in recent times due to the increasing amount of freedoms that we gain. However, it is only natural that free speech be something of extreme amounts of conflict since this right is expressed in the very first amendment of the Constitution. But, how loosely should such an important document within our history be interpreted? This has been a question for years, and it is obvious that this particularRead MoreThe Black Lives Matter Movement1197 Words   |  5 Pagesit? We are always thinking that one is right and one is wrong. But John Mill suggests that truth is going to be found in the middle somewhere as a combination .(Page 43). But if we are only hearing one side, we are limited and cannot find the truth. He believes that suppression is also wrong. In order to find the answer or the truth we must have an open dialogue. truth only comes after expression of our thoughts and expression of our narrative. The black lives matter movement has been coming on strongRead MoreThe Work Of Mill : The Foundation Of Liberalism And Modern Day Politics1613 Words   |  7 Pagessociety over the individual† (Mill 1). In other words, who or what has the right to impose restrictions on an individual or on society. The English philosopher, John Stuart Mill, argues such concepts of free expression and political theory in his essay titled, On Liberty. The work of Mill is considered to be the foundation of liberalism and modern day politics. In order to fulfill the idea of perfect liberty, there must be no restrictions or limitations enforced on expressions so that society may attainRead MoreConflicting Visions of Freedom in John Stuart Mill’s On Liberty and John Locke’s The Second Treatise of Government1275 Words   |  6 Pagesframework of each thinkers optimal state propose two conflicting visions of the very essence of man and his freedom. Locke and Mill have completely differen t views when it comes to how much freedom man should have in political society because they have obtained different views about man’s potential of inheriting pure or evil behavior. In chapter two labeled as â€Å"Liberty of Thought and Discussion†, Mill includes two separate arguments in his writing. His first argument focuses on the assumption that suppressed

Main Disadvantage. Participants’ Opinions And Feelings

Main Disadvantage Participants’ opinions and feelings aren’t considered. The analysis is therefore less in-depth and tends to give only a superficial understanding of the emotions or reasons associated with the answers given, although it can be used to measure the extent or degree of participants’ attitudes. If only a small sample can be obtained, and because each answer is unique, the information won’t necessarily represent the entire population. Results Results tend to be conclusive and come with a higher degree of certainty. Results tend to be explorative and aren’t necessarily true or reliable as information analysed is mostly based on personal accounts, not fact. Tools Examples of quantitative data collection methods include: †¢ Data†¦show more content†¦For example, managers typically prefer figures in a cost-benefit analysis since these are usually more convincing than are non-quantifiable considerations. Such data is usually more objective, reliable, concise and takes less time than qualitative research. Such methods are useful for finding evidence to contradict or support a hypothesis or idea. While quantitative methods produce answers to â€Å"what† and â€Å"how many† type questions, they do not so suitably answer â€Å"why† type questions or allow for individual descriptions. Numbers are good, but usually don’t tell the whole story. Mathematical models are sometimes too simplistic and may not be the complete answer. Qualitative research is much less rigid than is quantitative research and looks beyond numerical evidence and invites descriptions and comments about the bigger picture and contextual considerations such as feelings, needs, desires, emotions, motivation, morale, attitudes and behaviours, none of which can be easily or conveniently described in numbers. In practice, managers shouldShow MoreRelatedResearch Methods1422 Words   |  6 Pagesreplicated easily. The disadvantages are that it can take a lot of time, it is difficult to find willing participants and there is a bigger risk of human error. I chose not to use this as my rese arch method, because to do an experiment to would take anything from 2-6 months, which is time I do not have. It could also be classed as being intrusive watching a mother breast feed, which may be a big ethical problem, and because of that it will be hard to find willing participants. Another method ofRead More Research methods Essay1402 Words   |  6 Pagesreplicated easily. The disadvantages are that it can take a lot of time, it is difficult to find willing participants and there is a bigger risk of human error. I chose not to use this as my research method, because to do an experiment to would take anything from 2-6 months, which is time I do not have. It could also be classed as being intrusive watching a mother breast feed, which may be a big ethical problem, and because of that it will be hard to find willing participants. Another method of researchRead MoreResearch Method Table For Tma011140 Words   |  5 Pagesarticle does not express personal opinions, it is unbiased. It is supported by relevant information, figures and facts. Emphasising the factors associated with pain as well as limitation of small study sample. There is a clinical evidence of pain in bipolar disorder, however does not specify the type of the pain. Overall, the study is well balanced. Methodology How was the information gathered together? The statistical data were collected from selected participants in a multi-centre where cross-sectionalRead MoreDifferent Accents Of Non Native English Teachers1238 Words   |  5 Pagesaccent of non-native English teachers who teach them. Another aim of this research is to explore whether the different accents of non-native English teachers affect the comprehension of the students in the class. Research Questions and Hypothesis: The main focus of this study is to answer the following questions: 1-What is the attitude of Saudi University students towards the accent of non-native English language teachers? 2-Do males and females differ in their attitudes towards the accent of non-nativeRead MoreOnline Marketing Research Is The Wave Of The Future1246 Words   |  5 Pagesdrawbacks do you see associated with online research? What are the privacy issues? Online marketing research has been the way of the future and the route most marketers are going nowadays. Online marketing research though does have its advantages and disadvantages. Just a few of the advantages are the low cost and the amount of time that is required. The Internet has made online marketing research low cost. The marketers do not have to send out any physical mail and pay for the supplies and postage for aRead MoreThe Principle Of Conducting Research990 Words   |  4 PagesThe principle of conducting research is sprouting and growing, which it has turned out to be a important skill in today’s modern world. A main importance of nursing is to deliver patients with high-quality and excellent service and care. It has concluded and established that lack of research in clinical practice is merely a practice without validation. Research is dynamic and a vital component used in appraising the efficiency and efficacy of modalities in nursing treatments and also to ex aminingRead MoreOrganizations Paper1269 Words   |  6 PagesAssignment 4 The purpose of this paper is to define and explain the bureaucratic organization listing the characteristics and identifying the main principles. In addition to define an agile organization listing the characteristics and identifying and listing the nine steps of management by objectives. Also listing the advantages and disadvantages of both the bureaucratic and agile organizations. This information is imperative to the police department. Decisions will be made as to the type ofRead MoreIndependent Research : Teachers Perception Of Inclusion913 Words   |  4 Pageshave chosen to do this research is as a teaching assistant I have a view and opinion of inclusion and whether inclusion is right for pupils with and without SEN. I am also a parent of a child with SEN who is facing the decision whether to send my child to a mainstream secondary school, or whether a special school would be better suited to his needs. The aim of this research is to gauge the views, opinions, thoughts, feelings, and teachers’ perceptions of inclusion within their classrooms. The methodRead MoreRacism And Racism Essay1620 Words   |  7 Pagesdiscrimination is a behaviour. There are two types of ways in measuring stereotypes: they are implicit and explicit measures. As for explicit measures, it refers to the straightforward asking of participants on their own stereotypes and prejudices. This can be done using interviews or questionnaires or participant observations. However, explicit measures rely on self-reports or easily observed behaviours. This was easier during the past because social norms were far more accepting of group-based biasesRead MorePositivism And Positivist Two Approaches Of Interpreting Social Reality1381 Words   |  6 Pageslaws that determine human behavior (McLuhan 1996: 2). Positivist researchers stay disconnected from the members of the research by forming a distance, which is vital in remaining emotionally unbiased to make strong discrepancies between reason and feeling. Positivists also uphold a clear division among science and personal experience along with fact and value judgment. It is also important in positivist research to seek objectivity and use consistently rational and logical approaches to research (Pruss

System Engineering Strategic Information Systems - Free Sample

Question: Discuss about theSystem Engineeringfor Strategic Information Systems. Answer: New Complex System Development Incurs Risks The development of new complex system and advanced technology raises risk in the organization. The advanced development phase is used to resolution majority of uncertainties through process of validation of the system design approach. The processes, which are used to develop the complex system, are installation as well as simulation of the environmental conditions, development test and validation of system components (Arvidsson, Holmstrom Lyytinen, 2014). Risk assessment is a system-engineering tool, which is used to develop the complex system and mitigate the risks from the system to work it properly. Both hardware as well as software is used to develop a project and system, therefore there is a risk of supply issue on the manufacturers end (Buede Miller, 2016). Within the old system, if the previous data are required to operate a new system, then conversion of data are needed to manage to make sure that it can run properly. If there is high turnover rate within the organization, then it will affect the development of new complex system (Paolucci Sacile, 2016). Therefore, any development of new system will incur risk as it takes long time away to develop it. For overcoming with the incurred risks, both change control as well as change management are used to deliver the system on time as well as in the budget. The new complex system development incurs risks in some of the cases. It is seen that development of new computing system for the aerospace application causes risks that result into extension of product time, drive up of budget as well as disrupt the programs. In the aerospace application, there is continuous change requirements, products are complex to execute and there is critical project module integration (Chernysheva, 2013). Technical risks within the aerospace application leads to larger risks which causes functionality as well as performance failure. Commercial-off-the-shelf (COTS) system is used to minimize the risks in new complex system development. This system mitigates the development risks within the new complex system through the process of testing. Aircraft as well as ground vehicle control application are designed properly (Sandu et al., 2014). Through the process of documentation, the risks within the system are reduced. The use of COTS system in the development phas e means that the development code is being written as well as debugged properly. When the cost of NRE is removed from the subsystem development lead time, then it reduces the cost of COTS computer system which results into elimination of risks from aerospace system development. The project stakeholders also play a major role in reducing risks from new complex system development project. The system has higher risk of failure; therefore, redundancy within the new complex system would mitigate the failure (Kapur Pecht, 2014). COTS system is used as a backup system and low cost COTS system reduces the consequences of failure of complex system. Such a redundant system reduces the system failure as well as gives a safe operation of the system. Six Design Features or Characteristics that Contribute to the Laptop Reliability A laptop is a portable computer, which is used by variety of people. It consists of input, output as well as capability of the desktop computer, which operates into various environments such as vibration, temperature as well as shock. There are many design features, which make the laptop reliable to use by people (Schwab, 2013). Most of the components of the laptop are interfaced with other, and the features of the laptop are significant based on its functionality. The following are six design features, which contribute to laptop reliability, are categorized as display quality, keyboard and responsive touchpad, hard drivers, battery, durable design as well as processor. Firstly, the display quality feature defines that the laptop screen displays all the functions of the laptop, which is performed, with input of user as well as internal processing part. With advanced technology, there are chances of developing the display screen. There are various types of screen and displays of lapto p such as LCD, plasma, LED etc. Its cost composition is medium (Mengxuan et al., 2016). Secondly, keyboard and responsive touchpad design feature shows that there is a smooth cursor movement. Some of the laptops have feature of turn on and off the touchpad. There are various types of keyboard such as standard, laptop size, flexible keyboard and thumb sized. Even a keyboard consists of basic keys like alphanumeric, shift, function and cursor control keys. Touchpad is a device, which has tactile sensor to translate the position of fingers of users. Its cost composition is low. Thirdly, the hard driver is the device for data storage for storing digital information into it. The magnetic head into the hard driver reads as well as write the data to the surface of platter. The hard driver requires a capacity of 2, 3 or 4 TB of storage space. Its speed varies between 4000 to 15000 RPM. Its cost composition is medium (Sabbaghi et al., 2015). Fourthly, the battery is one of the significant design features for the laptop reliability. The laptop is using Lithium-ion batteries, which is lightweight as well as longer lifespan. The life of the battery of laptop is finite. Even the batter life of the laptop is improved by dimming the laptop screen, changing the settings of power and disabling the Wi-Fi. Its cost composition is medium (Siewiorek Swarz, 2014). Fifthly, durable design signifies that the laptop should have best performance based on its maintenance of screen, battery, keyboard, hard disk etc. The laptop is designed with very thin spaces for purpose of airflow as well as cooling. Overheating of the laptop shortens the life of the components. Therefore, maintenance is required to keep it safe. It has low cost composition. Finally, it is processor, which works with the operating system in order to control the computer. The processor of the laptop is less heated as it runs at a lower voltage and with a clock speed (Kap ur Pecht, 2014). Therefore, it reduces heat as well as consumption of power but it slows the processor down. It has high cost composition. Three Factors of Test Failures and Steps to Diagnose the Causes of Failure In the testing process, there are many factors, which can result into failure of test. Firstly, test failure is due to environmental condition such as strong magnetic field, pollution cloud that results into hardware fault. This type of fault results into change the software execution. Secondly, the cause of failure is human factors. Sometimes, there is error from the human side to interact with the software (Meeker Escobar, 2014). There is wrong input of value and therefore the output is being misinterpreted. Thirdly, there are chances of incorrect assumptions related to the requirements of system. The software developer while understanding the requirements of the system testing does it (Christensen, 2013). Before, during and after the test failure, root cause analysis should require to do while diagnosing the causes of test failures. It is a popular technique, which helps the software tester to identify the problem within the testing process. This technique is used to analyze thre e of basic causes such as physical, human as well as organizational causes of failure. This analysis comes when there is a requirement of improving the quality of system (Sabbaghi et al., 2015). Root cause analysis consists of three steps to mitigate the problems such as providing a problem definition, gathering of data on the problems and analyzing the problems. It is the best method for analyzing the issues as well as problems within the system so that on time it should be mitigated. At the time of maintaining a video game, which contains millions of lines of code, root cause analysis is the best technique to detect the problems (Lewis, 2016). Mainly, there is test failure into the video game due to error in entry of codes. This technique tracks the defects and then identifies its patterns. It identifies the weakness of the system within development system. Further, the software tester does review if this analysis gives any chances in the test failure defects (Collacott, 2012). This technique provides with data in order to improve the software development. It helps to give customer value as well as accurate data. A stakeholder meeting is conducted to take their suggestions on diagnosing the problems. Tasks are allocated to different members based on their skills and knowledge (Maslach, 2016). Root cause analysis is used to identify as well as correct the causes of the test failure, rather than addressing the results. After identifying the problems, it is required to take preventive measures in the future. Brainstorming is required to do so that the project team can eliminate the causes of failure. Finally, the changes, which are made due to test failure, are monitored properly so that it cannot give any influences on the project work (Gercek, Saleem Steel, 2016). Most of the software developer uses this technique so that they can recognize the problem within the testing process. Problem definition, data gathering and problem analyzing are the most important to identify the causes of the test failure in any system development project work. Criteria to Decide the Best Approach (in-house or procure) A complex system consists of subsystems, parts as well as components, which are required outside subcontractors as well as vendors. It is done either by in-house as well as procures those (Matsushima Pan, 2016). In this particular case, there are two choices such as buying of parts from outside and giving it to the sub-conductors to make the parts in-house. The criteria to select outsourcing vendor are that the vendor should be focused on quality of products and services (Jan et al., 2016). The vendor should have price that it should enable customer sufficient for savings of cost. It is required to understand the capability of the vendor. Most important is security of the customer data at the vendor site. Therefore, vendor should consist of security policies to secure the data of their customers. A technology infrastructure is required for the complex systems as there are unexpected failures are done within the system, which causes system failure (Sesay Ramirez, 2016). The other cr iteria to select the best approach are the communication method. It is required to see the way the vendor can communicate with their customers. In any system development project, a new complex system is outsourced should contain comprehensive system documentation. The outsourcer should take responsibility of document specification. The person can also plan for quality documentation and coding for the system. It is the way an outsourcer can make sure that it will obtain over the code, if it requires to. As an example, the organization can outsource their network management of their system but they can keep their end user support in-house. It provides the organization with a good balancing of on-site support for the employees (Buede Miller, 2016). Most of the organizations are using the outsourcing process to improve the customer service, quality as well as reduction of costs (Buede Miller, 2016). The reasons for outsourcing of the products are specialized skills of subcontractors, specialized equipments as well as cost savings. The other approach is in sourcing which is criticized by building of project team in order to operate the system functions. The team can control the activity as well as quality of the system (Meeker Escobar, 2014). Most of the organizations are in-house their core operations in order to innovate their business within marketplace. While hiring of in-house, the organization requires skilled as well as knowledgeable person to work with system so that the proj ect work should kept in-house. At the time of hiring of persons for the project, it has greater control of cost. If the project work gets overtime, then after sometimes it will contain same cost. A specific work culture is also required to hire vendor for the work (Maslach, 2016). Therefore, after analyzing the two approaches, it is seen that outsourcing of vendor is the best approach for any organization for no down time, cost savings, concentrated expertise as well as no requirement to invest into equipments. Involvement of System Engineer in Design and Definitions of Support System The system engineer involves in design and support system project work, as they are required to writ code based on system requirements. Based on client requirements, the project is required to maintain. A logistics support system is required for successful system operational performance (Lewis, 2016). It optimizes of functional support, leverages of accessible resources as well as directs the process of system engineering. Logistics support is a process, which reduces the demand of logistics and makes the system efficient to support. The system engineer involves in supply support to acquire of support items as well as spare parts, catalog and receive of items, storage as well as warehouse, transfer and issue of items and providing initial support for the system (Matsushima Pan, 2016). The key features of supply chain activities of the service are to source the system components, ensure the transportation of service and deliver the services to the customers on time and within deadlin e. The features of spare parts in logistics support system are kept in the inventory to replace the failed units. There are two types of spare parts such as repairable and consumables (De Lemos et al., 2013). In logistics, there are two chances in investment of cost such as cost of ordering replacement part as well as cost to repair that part. There is requirement of spare parts to overcome with failure of system equipments. Even procurement of spare parts requires long lead-time. At the moment when the system fails, if there is no spare parts then there is system failure. Replaceable part level is the quick replacement of any damaged parts and units from the system at an operating location. This level is used for logistics planning as well as operation. Line replacement unit is used to improve the maintenance operations as they are stocked as well as replaced on quickly basis from the on-site inventories. It also reduces the cost of system as well as there is an increase in system quality. Training as well as documentation features are used to meet with the customers requirements (Sabbaghi et al., 2015). The training teams are system designers, training specialists as well as instructors. The documentation team ensures that transfers of knowledge to the employees are accurate as well as proper. While giving training to the employees, training manuals are required for them to give proper information on use of logistics support system. Training and documentation tracks, documents as well as implements the training activities in the organization. Customi zation of the training materials require instructions on the training topics, link with the training programs as well as ensure the employees to train them properly (Paolucci Sacile, 2016). Documentation is done on catalog and receives of items, transfer and issue of items, storage items and warehousing. The support system allows for leveraging of resources, directing the system process and optimizing of functional system support. Finally, the system engineer analyzes the quality of the system based on customer requirements as well as business requirements. References Arvidsson, V., Holmstrm, J., Lyytinen, K. (2014). Information systems use as strategy practice: A multi-dimensional view of strategic information system implementation and use.The Journal of Strategic Information Systems,23(1), 45-61. Buede, D. M., Miller, W. D. (2016).The engineering design of systems: models and methods. John Wiley Sons. Chernysheva, T. Y. (2013). Preliminary risk assessment in it projects. InApplied Mechanics and Materials(Vol. 379, pp. 220-223). Trans Tech Publications. Christensen, C. (2013).The innovator's dilemma: when new technologies cause great firms to fail. Harvard Business Review Press. Collacott, R. (2012).Mechanical fault diagnosis and condition monitoring. Springer Science Business Media. De Lemos, R., Giese, H., Mller, H. A., Shaw, M., Andersson, J., Litoiu, M., ... Weyns, D. (2013). Software engineering for self-adaptive systems: A second research roadmap. InSoftware Engineering for Self-Adaptive Systems II(pp. 1-32). Springer Berlin Heidelberg. Gercek, G., Saleem, N., Steel, D. (2016). Networked Services Outsourcing for Small Businesses: A Lifecycle Approach.Journal of Global Business and Technology,12(1), 23. Jan, S. R., Dad, F., Amin, N., Hameed, A., Shah, S. S. A. (2016). Issues in Global Software Development (Communication, Coordination and Trust) A Critical Review.training,6(7), 8. Kapur, K. C., Pecht, M. (2014).Reliability engineering. John Wiley Sons. Lewis, W. E. (2016).Software testing and continuous quality improvement. CRC press. Maslach, D. (2016). Change and persistence with failed technological innovation.Strategic Management Journal,37(4), 714-723. Matsushima, N., Pan, C. (2016). Strategic Perils of Outsourcing: Sourcing Strategy and Product Positioning. Meeker, W. Q., Escobar, L. A. (2014).Statistical methods for reliability data. John Wiley Sons. Mengxuan, L., Boqiang, R., Shunxian, Z., Jiahui, X., Lianbin, W., Zhe, W. (2016, August). The feasibility scheme design of power dispatching distribution data integrated network. InElectricity Distribution (CICED), 2016 China International Conference on(pp. 1-4). IEEE. Paolucci, M., Sacile, R. (2016).Agent-based manufacturing and control systems: new agile manufacturing solutions for achieving peak performance. CRC Press. Sabbaghi, M., Esmaeilian, B., Mashhadi, A. R., Cade, W., Behdad, S. (2015). Reusability assessment of lithium-ion laptop batteries based on consumers actual usage behavior.Journal of Mechanical Design,137(12), 124501. Sandu, I. S., Ryzhenkova, N. E., Veselovsky, M. Y., Solovyov, A. Y. (2014). Economic aspects of innovation-oriented market economy formation.Life Science Journal,11(12), 242-244. Schwab, D. P. (2013).Research methods for organizational studies. Psychology Press. Sesay, A., Ramirez, R. (2016). Theorizing the IT Governance Role in IT Sourcing Research. Siewiorek, D., Swarz, R. (2014).Reliable Computer Systems: Design and Evaluatuion. Digital Press.

The Duchess of Malfi Essay Thesis Example For Students

The Duchess of Malfi Essay Thesis John Websters The Duchess of Malfi was written in the early 1600s and is often considered to be Websters masterpiece. The story takes place in the Italian city of Amalfi during the sixteenth century, where the Duchess of the court of Amalfi is a young widow who has fallen in love with her steward, Antonio. Both of her brothers the Cardinal and Duke Ferdinand are against her remarrying and are very powerful. In becoming suspicious of the Duchess, Ferdinand hires Bosola to spy on her, while the Duchess thinks she has employed him as head of her stables. The Duchess unfortunately comes to have trust in Bosolo, and he discovers that she has married Antonio and had children with him in secret. As Ferdinands spy, he reveals the information to the Duke, and is then ordered by Ferdinand to kill the Duchess. After the Duchesss secrets are revealed, the play unveils into great tragedy as the brothers seek out revenge that results in the death of the Duchess, Antonio, and their children; the Duchesss hand-maid, Cariola, Bosola, the Cardinal, the Cardinals mistress and servant, and even Ferdinand. We will write a custom essay on The Duchess of Malfi Thesis specifically for you for only $16.38 $13.9/page Order now One of the motives often used in several other Jacobean plays is that of incest. It can be thought that incestual feelings for his twin sister, the Duchess, are the real reason that Ferdinand is so dead set on keeping his sister from remarrying. This is not obvious in the play, but implied, as there exists evidence of these feelings throughout the play. For example, he makes many sexual innuendos aimed at his sister throughout the entire play, such as we see here: Ferdinand: And women like the part, which, like the lamprey,Hath neer a bone int. Duchess: Fie, sir!Ferdinand: Nay,I mean the tongue Act 1, Scene iiAlso in Act 1, Ferdinand refers to his sister offensively as a lusty widow. Another piece of evidence which hints at Ferdinands possible incestuous feelings for his sister are in his last words, where he possibly shows recognition to these feelings, when he says,My Sister, O my sister! Theres the cause ont/ Whether we fall by ambition, blood, or lust, / Like Diamonds, we are cut with out own dust, (Act 5, Scene 5) linking back to the first Act in which the Duchess says, Diamonds are of most value / They say, that have passed through most jewellers hands, (Act 1, Scene 2)where the Duchess compares herself to a diamond, Ferdinand is cut by her dust. This shows that it is possible he realizes his destruction by the dust that he and his sister share. Even though he may have admitted to his downfall, it is unlikely that he truly understood his feelings partly because of his sickly state of mind at the time of his death.

Fieros Greek Civiliation free essay sample

Fiero’s first humanist actually seems to start in early Greek civilization. † Greeks were called the humanists of the ancient world†. (Fiero 30) The Greeks were known for their art, literature, as well as their religious culture. Fiero also refers to the humanistic period in which the great historian Thucydides wrote â€Å"The History of The Polynesian War† (Fiero 37) which we see celebrates the Greek culture in Athens during the Polynesian War. I believe this was a great example of the humanist in the Greek culture by showing the true spirit of Greek patriotism and community of the Greek people. We also see Fiero use the Greeks use what was called â€Å"symmetry†, on their statues and paintings. They believed the true aspect of the human being should be shown in actual form. They also show such detail and the proportion was correct. They also show that the human body was a work of art. We will write a custom essay sample on Fieros Greek Civiliation or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page We also see Fiero use the example of the â€Å"Parthenon† as the Greeks style of architecture. On the actual â€Å"Parthenon† they had the four horsemen, water bearers, and the showing of the festival in which the tribute to Helen was shown. This shows me that the Greeks were all about depicting the greatness of their civilization. The Romans basically copied the art and most of everything else so I will go straight to the Renaissance. Fiero refers to the Renaissance as the revival of the Greco-Roman culture. (Fiero 183) This was revised by the Aquinas. They were looking at this as the† fulfillment of the human potential†. (Fiero 183) This is what I see in the art of the Renaissance is that the pieces had depth and perception and proportion and symmetry just like the Greco-Roman style. Fiero comments that new Renaissance humanists have religion in their lives but look at their intellectual curiosity has appealing and appeasing. According to Fiero the most Renaissance Humanists was â€Å"Francesco Petrarch†. (Fiero 184) I believe Francesco was a restorer of early Latin works. I believe he was trying to bring to life the old classics of the Greek world. I think he wanted to show that he was a great poet as Cicero. I think he was torn on whether he was a great believer or reasoner. I believe he chose to be a believer. In his sonnet I think he was torn on his love for his lover or his love of words. I see these as examples of Fiero’s humanism.

Sydney Business School

Sydney Business School School Description University of Wollongong is situated in the south coastal city of Wollongong. This is a few kilometers from Sydney. The main campus of the Sydney Business School is located in Wollongong. Apart from the campus at Wollongong, Sydney Business School has a campus at the heart of the city of Sydney.Advertising We will write a custom report sample on Sydney Business School specifically for you for only $16.05 $11/page Learn More The school offers various postgraduate courses in business related fields. It also offers specially tailored courses to individuals outside campus through its external study program. The school encourages research in various business fields (Sydney Business School, 1). Sydney Business School has many supply chain interactions. It focuses attention on universities and colleges that offer undergraduate courses. This is where they get their clients. In supply chain terms, it can be described as the downstream part of the s upply chain. The university, through its various programs, educates professionals who enter into the job market. This preparation of entry into markets must be coordinated by the various players (Sydney Business School, 5).Therefore, it forms part of a long supply chain that involves input and analysis from the various stakeholders. This includes business organizations, the university research departments and the government. Although the government is the engineer of all the syllabuses offered in Australia, the school is majorly involved in its initial phase of contribution (Haag, 45). When post graduates come out of the school and enter the job market, they must portray the relevant quality of education that the university offers. Other areas that engage supply chain is the various purchases that the university makes for sustenance. This includes books purchases, food purchases and other relevant learning materials. The schools hiring team, which involves number of players, makes s ure that the university has qualified staff. This includes lecturers and other staff. These people are the determiners of the quality dimensions of the services offered and hence the outcome (Halldorsson, 6).Advertising Looking for report on business economics? Let's see if we can help you! Get your first paper with 15% OFF Learn More Strategies Used To Fulfill Supply Needs Sydney Business School has a number of supply needs. This includes food, books and replacements of staff. If not well managed, the supply needs may bog down operations at the school (Kouvelis, 34). Therefore, the university has come up with strategies that ensure proper and uninterrupted supply of the required materials. The school meets its supply needs through proper engagements with both the upstream and downstream members of the supply chain. By ensuring that students pay school fees, the university is prepared to meet other obligations. These are met through contracts. The school ent ers into contracts to meet its daily needs. This includes important supplies like food and stationery (Oliver, 6). The school has to make sure that it meets the required threshold of the teaching staff. By engaging with professionals and consultants in the field of business, the school is easily able to indentify people who can easily fit in its teaching world. This is sufficiently done by its personnel/human resource department. This is to make sure the school has graduates who have a feel of the practical world. The school also forges important liaisons with organizations the world over. This is because of their research and student placement programs. These programs that require realistic application of theory need such organizations, hence the need to have proper association. It also forms the employer base of the post graduates at the schools (Larson, 23). Efficiency and Effectiveness of the Supply Chain There are many factors that determine the success of a supply chain. Effec tiveness and efficiency of a supply chain are a measure of the satisfaction that is registered on everyone’s faces at the end of the whole process. Sydney school is a service provision organization. Most of its graduates are market leaders in employment circles. Research shows that the university is rated among the best in Australia. It also falls within 2% of the most successful universities in all fronts (Sydney Business School, 5). This includes research, student adaptability and take-ability in the job market and quality teaching. All these are a depiction of success in the supply chain from the downstream to upstream (Nagurney, 4).Advertising We will write a custom report sample on Sydney Business School specifically for you for only $16.05 $11/page Learn More Importance of Supply Chain Management Supply chain management is crucial in all organizations. In Sydney business school, that need is even bigger. It ensures that all departments that for m the whole of the organization work well and are coordinated. It also plays a major role in overall reduction of costs associated with its operations. This is because it is formulates a road map that easily makes operation less costly. Proper and well managed supply chains ensure that there is value addition to the end products. This is realized in Sydney Business School because of the nature of post graduates that emerge from the school (Sydney Business School, 10). Without proper supply chain management, the school may find it hard to easily coordinate its operations. This is detrimental; in any organization as it leads to lost business. To have a competitive edge in its field of operations, the university must employ proper supply chain management. It also ensures organization focus and scope. The schools admission and vision can only be realized if there are proper supply chain strategies to realize them. Effective supply chains are also critical in monitoring of suppliers. The y form the basis from which the schools success is based. Hence, their operations must be monitored to ensure they are up to standard. This includes lecturers, especially, who are at the center of provision of education to the larger student population (Sydney Business School, 12). The university has many strategies. These strategies are coordinated and linked by proper supply chain management. One of the strategies in this case is customer satisfaction. This is one of the frontiers from which the success of Sydney Business School is visible (Simchi-Levi, 3). Features of the School Just like any other college, the school ahs a vibrant student population. This community is unified by a single purpose of education. However, it may not be written in the schools mission and vision statement, but definitely the school has a business mind attached to its operations. This is motivated by profits. In every stage of any supply chain there is notable value addition.Advertising Looking for report on business economics? Let's see if we can help you! Get your first paper with 15% OFF Learn More This is true in Sydney business school. The school has upstream and downstream features that are common in any supply chain. The down stream is characterized by colleges that offer graduate courses and middle level colleges. This is the source of ‘raw material’ for the school. The upstream is made of the organizations that will require the services of the end product: the student (Ketchen, 5). The university has various departments. This includes the marketing, finance, human resource and administrative department. All these departments work towards provision of a single service: education. Therefore, if proper results are to be realized, these departments must be in harmony at all times. Supply chain management is critical to all these features and hence they are depiction of its common practices (Hines, 43). Resourcing Availability The schools operations are centered towards continuous progression. This is in line with any organization whose goals are to remain in bus iness for a long time. This means that it has to look for a way to ensure that this need is met. The university has come up with strategies that ensure this continuity. It has forged partnerships with various institutions of higher learning that continue to meet the standards that are required for a possible entry to the school. These partnerships ensure that they will have students that enter the school at any time (Chen, 34). To service its other requirements like in student catering, the school has contracts with suppliers who constantly supply them with materials. This is made easy by the regulations that govern any contract. It also has agreement with institutions that offer student placements after university. This has worked magic. It has formed a two pronged success as employers are satisfied with the nature of employees that they get and students want to join the university so as to get placements later on (Misiura, 4). Areas of Improvement Generally, the Sydney business sc hool’s operations are working well. Its supply chain is quite successful. It adheres to simple rules that govern supply chain management. However, there is room for improvement. The school can out source some of its operations in catering for students (Lavassani, 34). This will offload a burden that does not form the core business of the organization. Hence, it will give the school more point of focus and will improve its services to the students. The school can also forge more alliances with organizations that take students after university. The school will also reduce costs and hence increase effectiveness and efficiency if they cut unnecessary costs (Boyer, 12). Process Map Boyer, Kelly. Operations Supply Chain Management for the 21st Century. Mason, OH: South-Western Cengage Learning, 2010. Chen, Ian. Towards A Theory of Supply Chain Management: The Constructs and Measurements. Journal of Operations Management, 22.2 (2004): 119-150. Haag, Samuel. Management Information Systems for the Information Age. Canada: McGraw Hill Ryerson, 2006. Halldorsson, Anne. Complementary Theories to Supply Chain Management. Supply Chain Management: An International Journal, 12.4 (2007): 284-296. Hines, Tony. Supply Chain Strategies: Customer Driven And Customer Focused. Oxford: Elsevier, 2004. Ketchen, Junior. Bridging Organization Theory and Supply Chain Management: The Case of Best Value Supply Chains. Journal of Operations Management, 25.2 (2006): 573-580. Kouvelis, Peter et al. Supply Chain Management Research and Production and Operations Management. Review, Trends, and Opportunities. In: Production and Operations Management, 15. 3 (2006): 449–469. Larson, Peter. Logistics versus Supply Chain Management: An International Survey. International Journal of Logistics: Research Application, 7.1 (2004): 17-31. Lavassani, Kyle. Developments in Theories of Supply Chain Management: The Case of B2B Electronic Marketplace Adoption. The International Journal of Kno wledge, Culture and Change Management, 9.6 (2009): 85–98. Misiura, Sharp. Heritage Marketing. London: Elsevier, Burlington, 2006. Nagurney, Anna. Supply Chain Network Economics: Dynamics of Prices, Flows, and Profits. London: Edward Elgar Publishing, 2006. Oliver, Richard. Supply-Chain Management: Logistics Catches Up With Strategy. London: Outlook, Booz, Allen and Hamilton Inc., 1993. Simchi-Levi, Daniel. Designing and Managing the Supply Chain. New York: McGraw Hill, 2007. Sydney Business School. Sydney Business School. 2011. February 25, 2011. Web. https://www.uow.edu.au/student/uowx/regional-metropolitan-campuses/sydney-business-school/

EVIDENCED BASED PRACICE Literature review Example | Topics and Well Written Essays - 1500 words

EVIDENCED BASED PRACICE - Literature review Example Multicentre study essentially represents the research study that is planned and is supported by various cooperating institutions. These institutions have been organised in order to assess variables along with outcomes within a specific patient population. There exist certain advantages and shortcomings pertaining to the multicentre study. In such kind of study, assessing the number of patient’s that would be required to conduct the study becomes quite convenient. This further assists in deriving the key outcomes that are convincing and are accepted at a higher level. In this article, this key term shows certain amount of relevancy. The article circles around the certainty of the risk factors pertaining to ‘Diabetic Neuropathic Foot Ulceration’. This is considered as multicentre study because requirement of patients’ number in the aforementioned case is important to have an in-depth knowledge about the problem. The technologies and instruments among others t hat have been implemented depict the association of multicentre as the key term with the article. For instance, â€Å"at baseline and at every subsequent visit (weeks 13, 26, 39, and 52), a thorough foot examination was performed to determine presence of a first or new ulcer† (Abbott & et. al., 1998). This ensures that the depiction of data reflects the implementation of multicentre study. The next key term can be considered as the predictive risk factors. In case of the predictive risk factors, it refers to the instant predictions that can be made pertaining to the relevant problem. In keeping with the predictive risk factors, it can be affirmed that it might accelerate the patient’s risk pertaining to the development of certain diseases. In this article that deals with foot ulceration in case of diabetic neuropathy, the patients might develop any adverse conditions with regard to the treatment being provided. Predictive risk factor has been focused with greater impor tance as a search term in order to derive the particular literature/article. It ensures the various risk conditions that might arise under certain treatment measures (Lund Research Ltd, 2013). The entire article related to ‘Diabetic Neuropathic Foot Ulceration’ deals with this particular disease. The objective of the article is to investigate the prognostic factors pertaining to the foot ulceration for the diabetic patients. Thus, these aspects can be taken into consideration as the key factors (Shaw & et. al., 2003). Key Words Highlighted Within the Literature The key words highlighted in the evaluated article are Vibration Perception Threshold (VPT) and Michigan DPN. In accordance with VPT, it is a form of measure that is applied in the peripheral neuropathy related to Type 1 diabetes. This measure has also been applied in this article to get the outcome related to foot ulceration within the diabetic patients (Martin & et. al., 2013). The prevailing tests conducted by the usage of VPT are useful in deriving the results pertaining to foot ulceration. Michigan Diabetic Polyneuropathy (DPN) is another form of measure that is applied in order to derive